Search
Search
Browse Categories
Helpful tools:
Suggested FC Levels
Color Temperatures
Light Bulb Shapes
Energy Saving Calc
Light Distribution

MR16 FNV Light Bulbs



MR16 FNV light bulbs with a wide flood beam pattern for a brighter low voltage lighting system.
Price Each: $6.00

Item Number: BLF13416
MR16 FNV light bulbs are used in track lighting or recessed in many businesses and homes. They have a whiter, more intense light than a standard incandescent flood light. You'll find them used most often in retail lighting where a whiter, intense light is desired to bring out certain highlights. These MR16 lamps have a 50 watt rating and a 60 degree beam spread which is a wide flood beam. They are available in either a covered or open lamp version.

Product features:
- 12 volts.
- 50 watts.
- 60 degree wide flood beam spread.
- 5.3mm between pins on center.
- 2 inch diameter at the reflector opening.
- 2000 hour average rated life.

About this product.
When people started implementing track lighting for certain kinds of retail situations, one of their biggest complaints was that the actual track heads were just too big. It didn’t matter what bulb was used in the the size was usually too large for a store or living space that had a lower ceiling. That was one of the significant benefits of MR16 light bulbs that they delivered a lot of light that was a halogen source and yet it was something that was relatively compact. It meant that the size of the track heads could be smaller and could be used in lower areas and some ways disappear into the ceiling. These lamps have a tremendous lighting effect and are excellent in delivering a certain sense of drama to the lighting scheme. One of the things that people like about these is that they have a considerable variance in beam control. You can get everything from a broad flood, a narrow flood, a spot or a narrow spot beam spread, anything you would need for your particular lighting application. These typically have a warm white color somewhere around 3200-3500K light color, but they do come in other colors as well. These are halogen lamps that operate on a 12-volt circuit most of the time. There is the 120-volt version of MR16 bulbs that many people prefer because they don’t have to have a transformer in line. That was one of the significant advantages of getting it to a 120-volt operation. But the larger installed base of this type of lamp is certainly the 12 volt. If you have a 12-volt lighting system, that’s considered low voltage, and you will see a transformer usually on the track and sometimes that needs to be replaced along with lamps.

Saving money with LED.
Because of increased energy efficiency with LED bulbs, many people are considering replacing their MR16 halogen bulbs if they haven’t already. It’s a great way to save energy while still maintaining the same quality of light that you have now. The prices also come down on those to the point that it will deliver a good payback. If you want to know how much the LED MR16 will save you over time, make sure to download our free energy calculations spreadsheet that’s on the left-hand column of our website. It will tell you exactly how much you can expect to save on your switch to an LED MR16. All you have to do is put in some of the data of your current system comparing it to one of the products that you would purchase from us. Most of the time it’s simply a light bulb change, no other rewiring is necessary. So it probably makes this one of the best ways to retrofit existing halogen with LED to get those extra energy savings. Most people see a payback anywhere from a few months to a few years depending on how they use it. There’s never been a better time to take a look at how you can save money by reducing your energy costs by merely changing from a halogen flood light bulb to a highly efficient dimmable LED.

Thinking about lamp life.
But for those of you who are sticking with the halogen version, we have a vast array of this type of lamp for your replacement needs. It still has an excellent color rendering, and you can get any beam angle that you choose. Even though LED can be a very close approximation of what the halogen was, there are times when only the halogen version will do. The color rendering is probably better in the halogen typically because it is an incandescent source of light. Its white light has often been associated with excellent color rendition and color temperature for any video or photography. The rated life on these is not particularly useful. They’re generally somewhere around 2000 hours, but we do have some that are rated upwards of 10,000 hours. If one of the aspects of this type of halogen lamp is that you want a longer life, then the LED should be something you should consider instead. So not only will you get savings electrically by going to LED, but you’ll also get savings on bulbs over time. Most of them are rated anywhere from 25,000 to 35,000 hours, and you can see that that’s going to be big savings in the future.

Be careful.
One of the things to keep in mind about halogen lighting is that it gets very hot. You never want to change them while they’re still hot, you should turn off the lights and wait for them to cool and then you can change them. Because of the dichroic coating that these have on the inside of the reflector, some of the heat is drawn back through the lamp. The back portion of the light is very hot even more so than the outer rim. Use every precaution and make sure that you’re not doing something that could injure yourself. There were many times in the past when customers would have a specific complaint about a particular kind of coloring that will come out the back of the lamp. This was often a problem in track lighting that had an open back MR16 lamp holder. One of the things that this dichroic coding does is that it paints kind of a rainbow color behind the lamp. This is usually something that people don’t want, but we do have remedies for that if you're going to stay with MR16 halogen bulbs. We have a black-backed or silver back version that doesn’t allow any of that to go out of the back of the lamp and onto a wall. It’s the one way you can alleviate that problem. The other way to do that is to move to an LED once again. The LED version of these lamps is probably the remedy for most of the problems that people have had with this type of bulb. We have many choices of LED on our website that could replace nearly anything that you would have. If you’re thinking about it and are unsure whether you need to go in that direction, make sure you call or email us with any questions that you may have.

Buying quality in bulk.
If you use a lot of these and are looking to make a more significant purchase,  contact us with that information and how many are looking for. We can get you some excellent pricing on those now, and you can save by buying in a bulk quantity. The brands do matter, and we have many choices that have excellent quality and are just some kind of cheap import. That was a problem in the past where some of the cheapest stuff was brought in from China without regard to whether it was good-quality or not. You’ll still see some of that the big box stores which are a funnel for Chinese products. All the purchasing agents from those companies knows is whether the price is cheap. We don’t deal with that kind of product. We only deal with vendors and manufacturers that have the best quality bulbs that are going to stand the test of time. We stand behind all the products and most people get their rated life all the time, never really any complaints with this lamp type.

The base.
The base on this lamp is merely a two pin base which is often a 5.3-millimeter pin spacing. There is other pin spacing such as 8 millimeters and that is usually on the 120-volt version or GU10 base. The 12-volt version is almost always the 5.3 millimeter. If you’re having trouble identifying which base or bulb you have, you can always call us with any of the information from the back of the lamp. If you don’t have that or it’s burned off, you can still send us a picture by email or text, and we can probably identify it for you as long as we know something about the wattage limitations of the track light fixture that you have. And speaking of track light fixtures, we have a complete selection of those in LED which have no lamps to replace. If you’re the type of person that is tired of changing light bulbs altogether, then this is a proper direction for you. It has an integral LED which doesn’t require changing ever, and the life of that light fixture should last you many years. Most of them come with a five-year warranty some even with a seven-year warranty, and that’s from the manufacturer, and it’s easy to get a replacement if it’s gone bad within that warranty.

How can we help you today?
If you’re unsure of which way to go with any of the new LED options, make sure to call us because we have a lot of expertise in this area. One of the nice things about those is that you can go to an entirely different colors such as cool white, you don’t have to stick with warm white color. With all these choices available it can be a little bit confusing, but that’s where we can help you determine what might be the best course of action in replacement. You may want to stick with your MR16 light bulbs the way they are, and it looks great for you. There’s nothing wrong with that, and we have plenty on hand to take care of your lighting needs. But if you’re looking for an upgrade to LED, we can also help you get the right one that’s going to match up best for your lighting application.
Item Number: BLF13416

Product Reviews

Rate This Product:
or Create a Review
(0 Ratings, 0 Reviews)

Related light fixture or light bulb products:

Page 1 of 2 Page 12movenext
MR16 light bulbs
MR16 Light Bulbs
Price Each: $4.00
MR16 Light Bulbs
MR16 EXN light bulbs for a brighter low voltage lighting system.
MR16 EXN Light Bulbs
Price Each: $6.00
MR16 EXN Light Bulbs
MR16 EXT light bulbs for a brighter low voltage lighting system.
MR16 EXT Light Bulbs
Price Each: $6.00
MR16 EXT Light Bulbs
MR16 EXZ light bulbs for a brighter low voltage lighting system.
MR16 EXZ Light Bulbs
Price Each: $6.00
MR16 EXZ Light Bulbs
Page 1 of 2 Page 12movenext
BuyLightFixtures.com spacer
Shopping Cart
Your cart is empty.
We take these credit cards and PayPal
Free shipping on $100 or more at BuyLightFixtures.com

Made in the USA flag.
Many USA made products!