Search
Search
Browse Categories
Helpful tools:
Suggested FC Levels
Color Temperatures
Light Bulb Shapes
Energy Saving Calc
Light Distribution

LED Retrofit Lights - Screw-In

One of the easiest ways to retrofit existing lighting systems to more efficient LED is to use the screw-in types of lighting. There are some instances where you have to bypass an existing ballast and others that you can directly screw them in with no rewiring necessary. Whichever route you choose, you will get higher energy efficiency and fast paybacks without having to pay a lot for labor. You will also get excellent lighting with these direct replacements that will give you the same amount of light for your particular situation. These are used in industrial applications or commercial lighting, but many people use them for those situations such as outdoor lighting as well.
Displaying products 1 - 12 of 54 results
Page 1 of 5 Page 12345movenext
LED corn light bulbs - 45 watt
LED Corn Light Bulbs - 45 Watt
Price Each: $115.00
LED Corn Light Bulbs - 45 Watt
Page 1 of 5 Page 12345movenext

Some general information.
At BuyLightFixtures.com, we want to make it easy for you to get more efficient lighting that’s going to perform well in whatever situation you use them in. This is one of the best ways to retrofit higher wattage light bulbs because the light output is obviously greater with these than some of the small screw-in type of LED. These are most often used in light fixtures such as outdoor globes, street lighting, wall pack lights, anywhere there’s a larger wattage you’re trying to replace with LED. The light sources most often something like a metal halide or high-pressure sodium or possibly a CFL or even a high wattage incandescent. This is less of a LED retrofit kit as it is a screw-in bulb change. And for those of you who are going to be using these outdoors in an area that might be susceptible to water, we do have these in wet location versions. There are so many different light options for something you can be used in either a parking lot or postop lighting. This makes it easy to switch to LED and something that’s very easy to install keeping your cost very low on your next lighting project. Not only will you get better light, but the energy savings in real dollars will be so good that you will get excellent paybacks, the time it takes to recoup your project cost through energy savings.

Saving money is nice.
And speaking of payback, there’s never been a better time to take a look at retrofitting your existing lighting system and have it pay for itself in a concise period. We have many low-cost options with the excellent quality that can get you to that payback that you’re looking for. If you’re unsure about how much money you’ll save by retrofitting, then download our free Excel spreadsheet which is on the left-hand column of our website. This will tell you exactly how much you can expect to save if you can just put in a little bit of simple data to make that determination. You’ll need things like the kilowatt cost, the wattage of your existing light fixtures and the quantity. Once you know that and how many hours a day it’s used, then you can compare it to one of our lighting retrofit kits, and you can see how much it will save and how fast it will pay for itself. If you’re interested in saving energy in your outdoor lighting, you may want to consider what you’re doing in your interior spaces. If your commercial building, many of you know that you can probably get a payback from anywhere from 1 to 3 years depending on utility rebates or just high kilowatt cost. Please keep in mind that we have a complete selection of interior light fixtures such as office lighting which includes recessed downlights, dimmable LED recessed lighting, ceiling lights, grid lighting and more. Perhaps you may want to consider having this being a part of a complete lighting project it’s going to save you a lot of energy now and in the future. But if your primary goal right now is to improve your outdoor lighting with LED while getting energy savings, we want to help you to that end.

Installation is easy.
When installing these types of higher wattage LED lamps, most of them require you to bypass any kind of existing ballast that may be in the system. With high bay lighting, people often do this kind of ballast bypass and it has to be done with everything in outdoor lighting as well. There’s only one way of getting around this that we have available, we do have some of the LED corn lights that can operate either in bypass ballast mode or they can function adequately with an HID ballast. So it gives you complete flexibility if you don’t want to change the ballast and just want to screw in lamps. That labor savings can be nice and you can always revisit the bypassing of the ballast later. So basically you can screw them in now, save your money on the labor to install them, then later when the ballast does go out you can simply rewire the fixture at that time. It gives people an option of not having to have a larger outlay for their initial switch to LED. If you have incandescent lamps right now going directly to voltage, you don’t need to do any rewiring at all, all you need to do is just screw in the bulbs although that doesn’t happen as often in something like higher wattage situation. Most people switched HID a long time ago for the benefit of energy savings that way. Most of the time you will have to do a ballast bypass.

Good lighting matters.
Another approach to take into consideration when moving to more efficient LED lighting is the color temperature of the LED retrofit screw-in. Some people like a very bright white like a 5000K color and you’ll see that used many times in a lot of commercial and industrial buildings. It’s also used a lot in outdoor lighting, and we have many types of screw-in retrofits there as well. For some people who are going to be retrofitting things like recessed lighting in some existing housing for a home, a lot of them prefer a warmer color light such as a 2700K color. It’s very close to the color of incandescent lighting, often what people are replacing with this type of retrofit. When making this kind of decision to save energy, you also need to keep in mind that one of the goals of this type of upgrade is the quality of the lighting you have. Good lighting can make the difference between greater productivity in an office or manufacturing facility, or just making your home look better. Now you can finally get the energy savings you would like while still getting better lighting. As we often say, if you save all kinds of money on energy but have a poor lighting job, you haven’t saved anything. That’s especially true if it’s a commercial business or retail store, it can adversely affect sales and productivity. So this is an opportunity to get it done right the first time with correct light distribution, color and operation making sure you have a great product is going to serve you well for energy efficiency but then also for an excellent lighting effect.

Warranties protect your investment.
All of the LED retrofit lights that you see here come with a 5 to 7-year warranty depending on the manufacturer. This is going to protect you from early failure, and all you have to do is call us if something fails during that time. We keep good records of when people bought the product and whether they're still within the warranty period. We want to make sure that you're covered from what is a sizable investment primarily in the higher wattage versions of the screw in lamps. They’re not inexpensive as a screw in bulb goes, but they will last a very long time, and we want to make sure that you’re going to get good performance and the life that is expected of it over time.

How can we help you today?
Please call or email us if you have any questions regarding anything you see in regards to retrofit lighting kits. We’ve seen many successful customers getting a considerable reduction in energy and having better lighting as a result. You can ask is any question you like about the components, about what you’re thinking about doing or about the quantity price. Often people buy these in more massive quantities because it’s part of a more significant project and we want to make sure that we give you the best price possible that we can do. If you’re unsure of how to apply this to your situation, you can always email us a picture or two of what you have and what you’re trying to retrofit.
BuyLightFixtures.com spacer
Shopping Cart
Your cart is empty.
We take these credit cards and PayPal
Free shipping on $100 or more at BuyLightFixtures.com

Made in the USA flag.
Many USA made products!