For best search results, use general, one or two word terms. Example terms such as: PAR20 or Retrofit.
Browse Categories

We sell USA made products whenever possible.

Low Voltage MR16 Recessed Light Fixture IC

Low voltage 4 inch recessed MR16 light fixture IC new construction
Low voltage 4 inch recessed MR16 light fixture IC new construction
Price: $85.00

Available Options & Add To Cart


Low voltage MR16 recessed light fixture IC new construction is an ideal choice for using MR16 halogen 12 volt lamps. The recessed lighting effect reduces glare for homes and office lighting. This is the type that can have direct contact with insulation. These have a finished look when combined with the mandatory trim selection you must select with this fixture. This is a new construction version and is made for direct contact with insulation designated by IC label.

- Lamps NOT included.

- AIRTIGHT - Meets IECC Energy Code. (Less than 2 CFM leakage at 1.57 PSI) Performance Tested per ASTM E283-84.

- Ceiling Cut-Out: 4-3/8 in.

- Plaster Frame: 11-3/8 x 15-3/8

- Lamp: Max (1) 12V, 50W MR16.

- Lamp Base: 2-pin GU5.3

- 120V Magnetic Transformer.

- UL, cUL listed for use in damp locations.

- Integral thermal protector guards against improper lamping.

- 120V magnetic transformer steps line voltage down to lamp operating voltage.

- J-box is listed for eight (4in - 4out) No. 12AWG (90 degrees C) through-branch circuit conductors and has five 1/2 in., one 3/4 in. and four Romex knockouts with true pry out slots.

- Romex knockouts include built in strain relief - no additional clamps required.

- Pre-installed hanger bars allow housing to be positioned at any point within 24 in. joist span. Score lines provided for easy field shortening to accommodate 12 in. joist span.

- Hanger bars can easily be field repositioned 90 degrees on the plaster frame.

- Hanger bars are designed to fit onto T-Bar spine for quick alignment and can be permanently secured without the need for additional clips.

- Housing adjusts for ceilings up to 1-3/8 in. thick.

- 7-3/4 in. height allows for use in 2 in. x 8 in. joist construction (when used with minimum of 1/2 in. thick ceiling).

- Sealed and gasketed construction limits air exchange between the ceiling plenum and heated or air conditioned areas- performance tested to ASTM-E283 (Washington State).

- Meets State of California Title 24 requirements.

- 2-year warranty.

- When dimming fixtures with magnetic transformers, you must use a dimmer rated for use with magnetic transformer.

Related lighting products you might find helpful:

MR16 light bulbs
MR16 Light Bulbs
Price: $4.40
MR16 Light Bulbs

Product Reviews

(0 Ratings, 0 Reviews)
Shopping Cart
Your cart is empty.