Low voltage MR16 recessed light fixture is an ideal choice for using MR16 halogen 12 volt lamps. The recessed lighting effect reduces glare for homes and office lighting. These have a finished look when combined with the mandatory trim selection you must make with this fixture. This is a new construction version and is not made for direct contact with insulation designated by Non-IC label.
- Lamps NOT included.
- Ceiling Cut-Out: 4-3/8 in.
- Plaster Frame: 5-3/4 in.W x 8 in.L
- Lamp: Max (1) 12V, 50W MR16.
- Lamp Base: 2-pin GU5.3
- 120V Magnetic Transformer.
- UL, cUL listed for use in damp locations.
- Integral thermal protector guards against misuse of insulation materials and improper lamping.
- 120V magnetic transformer steps line voltage down to lamp operating voltage.
- J-box is listed for eight (4in - 4out) No. 12AWG (90 degrees C) through-branch circuit conductors and has five 1/2 in., one 3/4 in. and four Romex knockouts with true pry out slots.
- Romex knockouts include built in strain relief - no additional clamps required.
- Pre-installed hanger bars allow housing to be positioned at any point within 24 in. joist span. Score lines provided for easy field shortening to accommodate 12 in. joist span.
- Hanger bars can easily be field repositioned 90 degrees on the plaster frame.
- Hanger bars are designed to fit on to T-Bar spine for quick alignment and can be permanently secured without the need for additional clips.
- Dimmer magnetic transformer (if you want to use a dimmer, it must be suitable for use with magnetic load).
- Housing adjusts for ceilings up to 1-3/8 in. thick.
- 5-1/2 in. height allows for use in 2 in. x 6 in. joist construction.
- 2-year warranty.
- When dimming fixtures with magnetic transformers, you must use a dimmer rated for use with magnetic transformer.